We asked business professionals to review the solutions they use. Here are some excerpts of what they said:
"There's lots of flexibility in how we use the resources while also maintaining a small footprint."
"We have been able to consolidate storage into Pavilion. Pavilions are our only SANs because it is a bring your own disk solution. When new drives come out, we are able to take out half of the drives in the system, put in new drives, move our VMs over to the new drives, take the other drives out, and populate those with new drives. Then, we are suddenly twice as dense as we were before. NVMe flash is only going to get denser and cheaper so we can make use of that every couple of years by just throwing newer disks into it at a fraction of the cost of a new SAN."
"The high performance is very valuable, as well as the enterprise reliability features."
"PowerMax NVMe has made it a lot easier to understand how much we are able to provision. It has made it a lot faster to provision new things. 90% of my time for provisioning has been reduced. Also, it has made it very easy to understand and see everything behind it versus the older heritage, where Dell EMC was very convoluted and hard to get working. Things that used to take an hour, probably now take five to 10 minutes."
"Based on our experience with VMAX, there isn't any hardware failure or something like that in PowerMax. Performance-wise also, everything is fine. We haven't faced any performance issues or any hardware failure. Its performance is great as compared to VMAX. Its I/O per second rate is higher than the old model."
"The solution's snapshot capabilities and replication are very good features. Snapshots are allowing us to quickly build analytical models directly from production data. This gives us amazing insights into market trends and allows us to build more effective trading algorithms. Replication offers us unparalleled levels of resilience."
"Technical support has been excellent."
"The optimization of the cache memory of each engine and the use of persistent memory."
"The performance is very good. Our predominant workloads are all less than 5 milliseconds and it's most common to have a sub-1-millisecond response time for our applications. In terms of efficiency, we've turned on compression and we're able to get as high as two-to-one compression on our workloads, on average."
"We like the compression, dedupe, and I/O on the PowerMax. They are better than on the XtremIO."
"The performance is very good on our servers. It's superior. And the QoS capabilities for providing work congestion protection are also important because about 99 percent of our servers are production servers."
"Its leading feature is the price-performance ratio, which is very good."
"What is most valuable about the Dell EMC SC Series system was its reliability."
"The product offers good performance and is quite powerful."
"The setup is straightforward."
"The solution is stable."
"The solution has a wide variety of valuable features. The data progression works well. We use the snapshot functionality quite a bit and really like it."
"In terms of stability, it's good enough. It's okay."
"One time, we had a drive fail and we were notified before we even saw it on the device."
"I would like to see the management layer improved."
"The rail system that Pavilion uses to mount up into a standard Dell or APC cabinet extends further back than normal rails, and they cover up the zero PDU slot. So, I don't like the rail system that comes with the device. That is my biggest complaint."
"In our current configuration, we can only run the line controllers in high availability, active-standby mode, whereas we would like to see active-active implemented."
"The main feature that I personally want to see is the possibility to upgrade to the next generation without changing all the components and just change the engine, relying on the compatibility matrices between two different generations. Meaning that we could just keep the enclosure and upgrade the engine, integrating the enclosure to the existing pool, then adding automation tools for orchestration."
"It's a relatively new product, but for the next release I would like to see higher bandwidth on the front-end adapters. This would allow even greater scalability for critical workloads and consolidation for non-critical workloads. The hosts may not require that level of I/O performance today. However, it allows us to scale physical non-cloud environments without large investment."
"Support of the product can be slow and an administrative challenge: planning, scheduling, and overseeing data center access for a Dell EMC rep. One improvement could be to enable a self-maintenance option. The requirements that we go through to get Dell EMC onsite to replace failed drives, power supplies, and other small redundant parts can be unnecessarily complex. If simplified, they could send us the parts, then we could replace them much faster, more easily, and truly within the SLA parameters."
"We would like more documentation, a guide to the features of the PowerMax."
"We brought up this question to the implementation engineer. We were comparing use cases where a customer is using RecoverPoint, then goes to PowerMax. In our previous setup with XtremIO, we were using RecpverPoint and keeping snapshots for 30 days, every few seconds. With PowerMax, I requested this for every 15 minutes, keeping it for a week. The engineer's answer was, "There will be too many snapshots. It might slow down the system." This is specifically for the use cases where there is RecoverPoint. While PowerMax works with RecoverPoint, and you can use it, there should be some way where you can have even more snapshots and not to worry about performance and system cache."
"I would like to see more development in the cloud environment. It would be good if it comes in the cloud kind of setup."
"We have had some trouble with the VMAX-to-PowerMax migration, but the VMAX box will be powered down after the migration. The PowerMax boxes are working fine and we don't have any issues with them."
"If the solution had more power-saving capabilities, it would be quite nice."
"The interface could be improved. It should have an application point of view."
"There's always room for improvement in the operating code."
"The lack of reporting would be the main issue."
"This product should be a lot more user-friendly."
"The initial setup is somewhat complex and should be made simpler to do."
"In some customer cases, customers experienced more performance or latency."
"Dell could improve the upgrading process."
"It would be helpful if the solution offered higher performance, at least on the back end."
"The licensing fees are very reasonable."
"This is hardware. They have a singular array that you can populate with your own disk, or you can buy the disks through them. For controllers, you pay for the components inside of the SAN, but there is only one chassis that they work with."
"In terms of price-performance, it beat out other competitors when we were taking a look and comparing it to the market. That was one of the biggest driving points for us."
"We hope that with the combination of both NVMe and SCM the next PowerMax will be much cheaper that the one which we acquired."
"The labor savings and support have been significant. If we're talking 100 hours of labor every three months, that is 100 hours of a database engineer costs. There are performance latency numbers as well as costs associated with recovering data that gets lost, and this system doesn't lose data. You can look at numbers that go around the cost of downtime, if data is not available. This system doesn't go down. Everyone's ROI is going to be unique, but the dependability and performance of the system combined with its ease of operation will definitely save businesses of all sizes money."
"One area for improvement, one that everybody always comes to, is price... it's still quite expensive to purchase these big arrays... For us, the pricing doesn't make Dell EMC uncompetitive."
"Negotiate hard and consider the commercial advantages/benefits to Dell EMC for onboarding your product."
"Support typically depends on the array. It can range anywhere from $7,000 to a couple of hundred thousand dollars."
"The pricing of Dell EMC Compellent is competitive."
"Pricing depends on varying life cycles."
"This product is too expensive compared to others, and I don't see any value in using it."
Pavilion HyperParallel Data Platform
The Pavilion HyperParallel Data Platform™ dramatically accelerates what organizations achieve by delivering universally unmatched storage performance, in an incredibly compact solution while reducing data center costs and complexity. Unrivaled flexibility for multiple data types and protocols, along with broad ecosystem integration, ensure that every customer has choice and control.
What is the Pavilion HyperParallel Data Platform
The Pavilion HyperParallel Data Platform is comprised of the Pavilion HyperParallel Flash Array™ and Pavilion HyperOS™. The Pavilion HyperParallel Flash Array leverages a unique, switch-based architecture to create a multi-controller solution that delivers an unmatched combination of high performance, ultra-low latency, and storage density. Pavilion HyperOS is a powerful, purpose-built storage operating system designed to unlock the power of the multi-controller Pavilion HyperParallel Flash Array, which delivers scalability and flexibility that no other solution can offer.
Pavilion HyperParallel Data Platform Data Sheet
Download the Pavilion HyperParallel Data Platform data sheet. Updated: December 2020
Dell EMC PowerMax is the world’s fastest storage array. It delivers new levels of performance and efficiency with a future-proof architecture that features end-to-end non-volatile memory express (NVMe) and a built-in machine learning engine. PowerMax is built on the comprehensive functionality and proven resiliency of Dell EMC’s flagship storage platform. It is designed for six-nines of availability and offers data-at-rest encryption (D@RE), massive scalability, and best-in-class data protection with Symmetrix Remote Data Facility (SRDF), the gold standard in remote replication.
Dell EMC SC Series arrays provide a unified platform for the ultimate in performance, adaptability and machine-driven efficiency. SC Series software delivers modern features that help you meet aggressive workload demands using the fewest drives necessary. With an open, future-ready design, SC Series storage integrates seamlessly with applications and infrastructure, enabling you to scale on a single platform and add capabilities without forklift upgrades.
Dell EMC PowerMax NVMe is ranked 3rd in All-Flash Storage Arrays with 10 reviews while Dell EMC SC Series is ranked 11th in All-Flash Storage Arrays with 12 reviews. Dell EMC PowerMax NVMe is rated 9.2, while Dell EMC SC Series is rated 7.6. The top reviewer of Dell EMC PowerMax NVMe writes "CloudIQ ensures that all our arrays are properly communicating so we can see performance and storage capacities". On the other hand, the top reviewer of Dell EMC SC Series writes "Automated architecture that proactively optimizes your database ". Dell EMC PowerMax NVMe is most compared with Dell EMC PowerStore, Dell EMC Unity XT, Pure Storage FlashArray, IBM FlashSystem and HPE Nimble Storage, whereas Dell EMC SC Series is most compared with Dell EMC PowerStore, Dell EMC Unity XT, IBM FlashSystem, Hitachi Virtual Storage Platform G Series and Lenovo ThinkSystem DE Series. See our Dell EMC PowerMax NVMe vs. Dell EMC SC Series report.
See our list of best All-Flash Storage Arrays vendors.
We monitor all All-Flash Storage Arrays reviews to prevent fraudulent reviews and keep review quality high. We do not post reviews by company employees or direct competitors. We validate each review for authenticity via cross-reference with LinkedIn, and personal follow-up with the reviewer when necessary.