We just raised a $30M Series A: Read our story

Compare Dell EMC PowerMax NVMe vs. HPE 3PAR StoreServ

Cancel
You must select at least 2 products to compare!
Featured Review
Find out what your peers are saying about Dell EMC PowerMax NVMe vs. HPE 3PAR StoreServ and other solutions. Updated: November 2021.
554,676 professionals have used our research since 2012.
Quotes From Members

We asked business professionals to review the solutions they use. Here are some excerpts of what they said:

Pros
"The high performance is very valuable, as well as the enterprise reliability features.""We have been able to consolidate storage into Pavilion. Pavilions are our only SANs because it is a bring your own disk solution. When new drives come out, we are able to take out half of the drives in the system, put in new drives, move our VMs over to the new drives, take the other drives out, and populate those with new drives. Then, we are suddenly twice as dense as we were before. NVMe flash is only going to get denser and cheaper so we can make use of that every couple of years by just throwing newer disks into it at a fraction of the cost of a new SAN.""There's lots of flexibility in how we use the resources while also maintaining a small footprint."

More Pavilion HyperParallel Flash Array Pros »

"The performance is very good on our servers. It's superior. And the QoS capabilities for providing work congestion protection are also important because about 99 percent of our servers are production servers.""The solution's snapshot capabilities and replication are very good features. Snapshots are allowing us to quickly build analytical models directly from production data. This gives us amazing insights into market trends and allows us to build more effective trading algorithms. Replication offers us unparalleled levels of resilience.""The performance is very good. Our predominant workloads are all less than 5 milliseconds and it's most common to have a sub-1-millisecond response time for our applications. In terms of efficiency, we've turned on compression and we're able to get as high as two-to-one compression on our workloads, on average.""Technical support has been excellent.""You can use PowerMax for all workloads and consolidation. We have used it to scale thousands of VMs.""The optimization of the cache memory of each engine and the use of persistent memory.""We like the compression, dedupe, and I/O on the PowerMax. They are better than on the XtremIO.""PowerMax NVMe has made it a lot easier to understand how much we are able to provision. It has made it a lot faster to provision new things. 90% of my time for provisioning has been reduced. Also, it has made it very easy to understand and see everything behind it versus the older heritage, where Dell EMC was very convoluted and hard to get working. Things that used to take an hour, probably now take five to 10 minutes."

More Dell EMC PowerMax NVMe Pros »

"I like that 3PAR can remake the disk online. That's one of the best features because when we first started, that was the best. The team provisioning feature was also a good one. Those features are the best for me, provisioning and online optimization, and the tier you can have for storage.""The technical support is very good.""The technical support has been fantastic.""The initial setup was straightforward.""The technical support is good.""The speed is very good.""The solution is easy to use and very stable.""3PAR is different from other storage solutions because it uses a chunklet when we initiate the storage. Every disk is submitted as a 1 GB chunklet. This chunklet can be RAID 1, 4, 5, or 6. This fabulous feature is very useful for me because I can distribute the RAID for any volume. The adaptive optimization is the biggest feature in 3PAR. 3PAR is very usable with thin volume because it detects zeros while writing. Every time I tell the hypervisor to make the full provisioning, it makes the volume as simple provisioning in 3PAR, not full provisioning. Other vendors take this volume as thick provisioning because of which the capacity is reached quickly. It doesn't happen in 3PAR because it detects zeros. It only writes the data, and it doesn't write zeros. There are two processors in 3PAR: the ASIC processor and the main processor. The ASIC processor detects zero writing and doesn't write it, which is a big feature in 3PAR."

More HPE 3PAR StoreServ Pros »

Cons
"The rail system that Pavilion uses to mount up into a standard Dell or APC cabinet extends further back than normal rails, and they cover up the zero PDU slot. So, I don't like the rail system that comes with the device. That is my biggest complaint.""I would like to see the management layer improved.""In our current configuration, we can only run the line controllers in high availability, active-standby mode, whereas we would like to see active-active implemented."

More Pavilion HyperParallel Flash Array Cons »

"We brought up this question to the implementation engineer. We were comparing use cases where a customer is using RecoverPoint, then goes to PowerMax. In our previous setup with XtremIO, we were using RecpverPoint and keeping snapshots for 30 days, every few seconds. With PowerMax, I requested this for every 15 minutes, keeping it for a week. The engineer's answer was, "There will be too many snapshots. It might slow down the system." This is specifically for the use cases where there is RecoverPoint. While PowerMax works with RecoverPoint, and you can use it, there should be some way where you can have even more snapshots and not to worry about performance and system cache.""Firmware updates are a bit painful because you have to involve their support, as opposed to having the ability to do it yourself.""We would like more documentation, a guide to the features of the PowerMax.""Support of the product can be slow and an administrative challenge: planning, scheduling, and overseeing data center access for a Dell EMC rep. One improvement could be to enable a self-maintenance option. The requirements that we go through to get Dell EMC onsite to replace failed drives, power supplies, and other small redundant parts can be unnecessarily complex. If simplified, they could send us the parts, then we could replace them much faster, more easily, and truly within the SLA parameters.""The main feature that I personally want to see is the possibility to upgrade to the next generation without changing all the components and just change the engine, relying on the compatibility matrices between two different generations. Meaning that we could just keep the enclosure and upgrade the engine, integrating the enclosure to the existing pool, then adding automation tools for orchestration.""We have had some trouble with the VMAX-to-PowerMax migration, but the VMAX box will be powered down after the migration. The PowerMax boxes are working fine and we don't have any issues with them.""If the solution had more power-saving capabilities, it would be quite nice.""It's a relatively new product, but for the next release I would like to see higher bandwidth on the front-end adapters. This would allow even greater scalability for critical workloads and consolidation for non-critical workloads. The hosts may not require that level of I/O performance today. However, it allows us to scale physical non-cloud environments without large investment."

More Dell EMC PowerMax NVMe Cons »

"While the stability is pretty good, it could always be improved upon.""The cloud-based monitoring Infosight would be better if users are automatically enrolled in the cloud/group based on the configuration or information gathered or uploaded on the internet.""HPE could improve by making an old flash system in order to compete with the current market. For the solution to be more competitive in the mid-range market they could increase the performance.""An area of improvement for this solution is an increase in the bandwidth as well as an upgrade of the storage functionality and capabilities. The storage needs to be expandable for future-proofing.""The replicating software is pretty complicated. I probably would have put it on a sequence.""This solution only provides active-passive replication, as opposed to active-active.""We do see room for improvement, especially in regard to expanding the defined storage areas.""The price is a little bit high."

More HPE 3PAR StoreServ Cons »

Pricing and Cost Advice
"This is hardware. They have a singular array that you can populate with your own disk, or you can buy the disks through them. For controllers, you pay for the components inside of the SAN, but there is only one chassis that they work with.""The licensing fees are very reasonable."

More Pavilion HyperParallel Flash Array Pricing and Cost Advice »

"The labor savings and support have been significant. If we're talking 100 hours of labor every three months, that is 100 hours of a database engineer costs. There are performance latency numbers as well as costs associated with recovering data that gets lost, and this system doesn't lose data. You can look at numbers that go around the cost of downtime, if data is not available. This system doesn't go down. Everyone's ROI is going to be unique, but the dependability and performance of the system combined with its ease of operation will definitely save businesses of all sizes money.""In terms of price-performance, it beat out other competitors when we were taking a look and comparing it to the market. That was one of the biggest driving points for us.""One area for improvement, one that everybody always comes to, is price... it's still quite expensive to purchase these big arrays... For us, the pricing doesn't make Dell EMC uncompetitive.""Negotiate hard and consider the commercial advantages/benefits to Dell EMC for onboarding your product.""We hope that with the combination of both NVMe and SCM the next PowerMax will be much cheaper that the one which we acquired."

More Dell EMC PowerMax NVMe Pricing and Cost Advice »

"We purchased the solution as CapEx and we only pay support now. I find the pricing fantastic.""The price of the license depends. Some people expect more from the hardware. Some expect more from the licensing, and that is because you can receive several licenses nowadays, such as the terabyte license. You buy the storage, and you pay extra for the terabyte license for the software. There is a one-time purchase for the license and you pay annually for the maintenance.""This solution is expensive. We pay every year for support. It's a lump sum because we pay for data center support services, and everything is included in one.""It is a bit more expensive. IBM is cheaper than HPE in Turkey.""If HPE reduced the price of 3PAR StoreServ they would be more attractive to mid-range companies.""We don't pay for any licensing fees.""This is not an expensive product but every time you add capacity to it, you need to pay for re-balancing.""The cost is reasonable given that the licensing is all included once you purchase it."

More HPE 3PAR StoreServ Pricing and Cost Advice »

report
Use our free recommendation engine to learn which All-Flash Storage Arrays solutions are best for your needs.
554,676 professionals have used our research since 2012.
Questions from the Community
Top Answer: We have been able to consolidate storage into Pavilion. Pavilions are our only SANs because it is a bring your own disk… more »
Top Answer: This is hardware. They have a singular array that you can populate with your own disk, or you can buy the disks through… more »
Top Answer: The rail system that Pavilion uses to mount up into a standard Dell or APC cabinet extends further back than normal… more »
Top Answer: Dell PowerStore is an all-solid-state midrange storage system. It has many internal elements taken from other Dell… more »
Top Answer: The performance is very good on our servers. It's superior. And the QoS capabilities for providing work congestion… more »
Top Answer: In terms of price-performance, it beat out other competitors when we were taking a look and comparing it to the market… more »
Top Answer: HPE 3PAR StoreServ is easy to use, fully featured and has a great graphical user interface.
Top Answer: The licensing cost for HPE 3PAR StoreServ is expensive.
Comparisons
Also Known As
Pavilion HFA
Dell EMC PowerMax, PowerMax
HPE 3PAR Flash Storage, InServ, Storeserv, 3PAR Flash Storage, HP Enterprise Storage, 3PAR Flash Array, HP 3PAR Flash Storage
Learn More
Overview

Pavilion HyperParallel Data Platform

The Pavilion HyperParallel Data Platform™ dramatically accelerates what organizations achieve by delivering universally unmatched storage performance, in an incredibly compact solution while reducing data center costs and complexity. Unrivaled flexibility for multiple data types and protocols, along with broad ecosystem integration, ensure that every customer has choice and control.

What is the Pavilion HyperParallel Data Platform

The Pavilion HyperParallel Data Platform is comprised of the Pavilion HyperParallel Flash Array™ and Pavilion HyperOS™. The Pavilion HyperParallel Flash Array leverages a unique, switch-based architecture to create a multi-controller solution that delivers an unmatched combination of high performance, ultra-low latency, and storage density. Pavilion HyperOS is a powerful, purpose-built storage operating system designed to unlock the power of the multi-controller Pavilion HyperParallel Flash Array, which delivers scalability and flexibility that no other solution can offer.

Pavilion HyperParallel Data Platform Data Sheet

Download the Pavilion HyperParallel Data Platform data sheet. Updated: December 2020

Dell EMC PowerMax is the world’s fastest storage array. It delivers new levels of performance and efficiency with a future-proof architecture that features end-to-end non-volatile memory express (NVMe) and a built-in machine learning engine. PowerMax is built on the comprehensive functionality and proven resiliency of Dell EMC’s flagship storage platform. It is designed for six-nines of availability and offers data-at-rest encryption (D@RE), massive scalability, and best-in-class data protection with Symmetrix Remote Data Facility (SRDF), the gold standard in remote replication.

HP 3PAR all-flash storage accelerates business agility by boosting application performance with over 900,000 IOPS at less than 0.7 ms latency. And it does this while delivering all the enterprise-class, Tier-1 features and functionality you expect from the storage platform that powers three of the world’s four largest managed service providers.

Offer
Learn more about Pavilion HyperParallel Flash Array
Learn more about Dell EMC PowerMax NVMe
Learn more about HPE 3PAR StoreServ
Sample Customers
Texas Advanced Computing Center (TACC), Statistics Netherlands (CBS)
Rackspace, Open Line
Just Energy, Latisys, team AG, DreamWorks, BlueShore Financial, Erasmus MC
Top Industries
VISITORS READING REVIEWS
Computer Software Company30%
Comms Service Provider20%
Government7%
Manufacturing Company5%
REVIEWERS
Financial Services Firm26%
Healthcare Company19%
Retailer13%
Manufacturing Company10%
VISITORS READING REVIEWS
Computer Software Company33%
Comms Service Provider18%
Financial Services Firm8%
Government6%
REVIEWERS
Financial Services Firm20%
Healthcare Company10%
Manufacturing Company9%
Energy/Utilities Company6%
VISITORS READING REVIEWS
Computer Software Company29%
Comms Service Provider23%
Government7%
Financial Services Firm5%
Company Size
VISITORS READING REVIEWS
Small Business72%
Midsize Enterprise3%
Large Enterprise25%
REVIEWERS
Small Business7%
Midsize Enterprise17%
Large Enterprise76%
REVIEWERS
Small Business20%
Midsize Enterprise24%
Large Enterprise57%
VISITORS READING REVIEWS
Small Business10%
Midsize Enterprise10%
Large Enterprise81%
Find out what your peers are saying about Dell EMC PowerMax NVMe vs. HPE 3PAR StoreServ and other solutions. Updated: November 2021.
554,676 professionals have used our research since 2012.

Dell EMC PowerMax NVMe is ranked 3rd in All-Flash Storage Arrays with 10 reviews while HPE 3PAR StoreServ is ranked 2nd in All-Flash Storage Arrays with 30 reviews. Dell EMC PowerMax NVMe is rated 9.2, while HPE 3PAR StoreServ is rated 8.4. The top reviewer of Dell EMC PowerMax NVMe writes "CloudIQ ensures that all our arrays are properly communicating so we can see performance and storage capacities". On the other hand, the top reviewer of HPE 3PAR StoreServ writes "Robust and easy to use with a simple setup ". Dell EMC PowerMax NVMe is most compared with Dell EMC PowerStore, Dell EMC Unity XT, Pure Storage FlashArray, IBM FlashSystem and NetApp AFF (All Flash FAS), whereas HPE 3PAR StoreServ is most compared with HPE Primera, Dell EMC Unity XT, HPE Nimble Storage, NetApp AFF (All Flash FAS) and NetApp FAS Series. See our Dell EMC PowerMax NVMe vs. HPE 3PAR StoreServ report.

See our list of best All-Flash Storage Arrays vendors.

We monitor all All-Flash Storage Arrays reviews to prevent fraudulent reviews and keep review quality high. We do not post reviews by company employees or direct competitors. We validate each review for authenticity via cross-reference with LinkedIn, and personal follow-up with the reviewer when necessary.